June 2021
Discover pulp paper and print applications

Thanks for your interest. This month we present products that are used in pulp paper and print applications.

Please read the contents and enter the identification code that you will find on the last page of the 2021 calendar.

By viewing all the contents, month by month, at the end of the year you will receive a gift.

The applications of FPZ products in the pulp paper and printing industry 

FPZ side channel blowers, dosing pumps and industrial fans find their use in the following fields of application:

  • Paper cutting
  • Cleaning the rollers
  • Drying of the stickers
  • Adhesive films and profiles
  • Recovery of shavings and powders
  • Waste water treatment
  • Cellulose treatment
  • Recovery of printing solvents
  • Abatement of volatile organic substances
effepizeta-color

Paper cutting

The side channel blower is used to suck away the sparks generated during the sharpening of the blades avoiding direct contact with the paper.

taglio-carta1

Elimination of sparks – in vacuum

The blower is used near the grinding wheels to suck away the sparks produced by the sharpening of the blades that allow the cutting of the paper reels.

Our solutions

The family of blowers used for the suction of sparks are the MS in MOR configuration.

Available with directly driven motor MOR

ms

MS
Single impeller single stage

Cleaning of the rollers

The side channel blower is used to suck away the solvents used in cleaning the rollers.

pulizia-rulli1

Suction of solvents

The blower is used to suck away the nebulized solvents for the routine cleaning of the rollers on the printing lines. The solvents are then led to a special filter which condenses them and expels them from the system.

Our solutions

The MS blower family is used for the elimination of solvents from the plant.

Available with directly driven motor MOR

ms

MS
Single impeller single stage

Drying of the stickers

The side channel blower is used to dry the adhesives following the coating phase.

asciugatura-adesivi

Adhesive drying – in compression

The blower is used in combination with the Windblade™ air knife inside the ovens to keep the air temperature high and dry the adhesives after the coating phase.

Our solutions

The families of blowers used for drying applications are the MS and TS, which can be combined with the Windblade ™ air knifes.

*Available with directly driven motor MOR and GOR
 

ms

MS
Single impeller single stage*

ts

TS
Double impeller single stage*

lamearia

Windblade™
Air Knife

Adhesive films and profiles

The side channel blower is used to adhere decorative films to adhesive profiles.

pellicole-adesive1

Decoration of adhesive profiles

The blower is used inside an oven to create a vacuum allowing the decorative film to adhere to the profile. The design on the film is then imprinted on the surface.

Our solutions

The family of blowers used for the decoration of the adhesive profiles are the MS in MOR configuration.

Available with directly driven motor MOR

ms

MS
Single impeller single stage

Recovery of shavings and powders

The side channel blower is used in paper mills to suck up chip and dust residues.

trucioli

Suction of shavings and dust

The blower is used in paper mills to suck up the various process residues, such as shavings and dust, keeping the environment clean and free of dust which is harmful to operators.

Our solutions

For the suction of shavings and dust MS blowers are used in MOR configuration.

Available with directly driven motor MOR

ms

MS
Single impeller single stage

doseuro_color

Waste water treatment

The metering pump is used for the treatment of waste water from the paper industry where there are pollutants, colloids, fibers, chlorides and sulphates.

acque-di-scarico

Dosing of chemicals

The pump is used to dose flocculants, defoamers and biocides into the water to eliminate pollutants, reducing the environmental impact.

Preparation of products

The stirrer is used to mix and prepare the chemicals to be injected into the water.

Our solutions

Spring return or positive return piston pumps are used for water treatment.

sr_a_green

SR Series – Type A​
Spring return

seriehpdp

PDP Series – Type A-I
Positive return plunger

doseuro_sistemi

Doseuro is also able to offer a complete system consisting of dosing pump, tank and  mixers

Cellulose treatment

The agitator is used in water tanks to bring the wood chips into suspension.

trattamento-cellulosa

Handling of wood chips

The agitator is used inside the tanks containing water to keep the crumbled wood floating.

Our solutions

EM agitators are used for the treatment of cellulose.

doseuro_sistemi

EM – Electric Mixers

arivent_color

Recovery of printing solvents 

The fans are used in the printing industry service plants to recover solvents.

recupero-solventi

Recovery of solvents

The centrifugal fan is used to recover the emissions generated by the printing and lamination processes. The air flow generated by the fan carries the solvents to the blast chillers where they are treated to be reused as ink in printing processes.

Our solutions

The fans suitable for this application are the S, R and P series: fitted with PTFE gaskets in order not to disperse polluting gases into the environment.

ATEX versions

serie-r

R Series

serie-p

P Series

serie-s-alu

S Series

Abatement of volatile organic substances

The fan is used to support the catalytic blast chiller to remove the “VOC” volatile organic compounds.

sostanze-volatili

Removal of volatile organic substances

The fan is used to move the air and transport the VOCs to the catalytic blast chillers.

Our solutions

The S, R and P series are used for the abatement of the “VOCs”. The fans are fitted with PTFE gaskets, in order not to disperse polluting gases into the environment.

ATEX versions

serie-r

R Series

serie-p

P Series

serie-s-alu

S Series

Recovery of shavings and powders

The fan is used to make the working environment in the paper mill clean and healthy .

trucioli-e-polveri

Suction of shavings and dust

The fan is used in suction to remove shavings and dust from the working environment.

Our solutions

The S, R and P series are the most suitable for the extraction of shavings and dust from the work environment. They are fitted with PTFE gaskets, in order not to disperse polluting gases.

ATEX versions

serie-r

R Series

serie-p

P Series

serie-s-alu

S Series

[fpz-gamification-pin-manager]